Wisycom MTP60-EUX Pocket Transmitter
The Wisycom MTP60-EUX is a pocket transmitter specially designed for professional wireless microphone applications.
Features
- Monitor and control with Bluetooth via Wisycom Manager software or mobile apps to adjust parameters in real time
- Dedicated hardware allows accurate real-time position monitoring with an advanced user interface
- Advanced linear technology (L20mW) eliminates intermodulation distortion for a more robust signal
- Embedded recorder to record directly on the MTP60 memory card with integrated Linear Time Code decoding
- Enhanced robustness against self-interference and antenna performance through a proprietary "intermodulation cancellation" circuit
- An integrated haptic engine that provides tactile feedback with different vibration patterns
- FPGA-based signal processing allows easy switching between wide and narrow band operation
- Miniature design with flexible PCB (no connectors) for extended reliability
- New ENS compander for totally clear sound
- Powered by 2 x AA batteries (Alkaline, NiMh, Lithium) or MPRLBP rechargeable Lithium battery (5.55 Wh)
- Bluetooth interface and mobile app allow full control from mobile or tablet
- Integrated low-pass audio filter eliminates ultrasonic interference from devices such as focus pullers
- Bluetooth 5 Long Range (Class 1, 100mW) with the MRK16 as a bridge allows remote control of the MTP60 over hundreds of meters
- Front panel buttons allow quick access to the menu thanks to multiple shortcut combinations
- Maximum input level of 26dBu (15.5 V clipping) to connect directly to mixers and instruments
- 48V phantom power to use wired microphones through the PHA60 accessory
Specifications
- Frequency range: 470 to 832 MHz
- Switchable channels: 2400 managed in 40 groups of 60 frequencies, fully customizable by the user
- Switching window: up to 362 MHz, depending on band
- Frequencies: Quartz PLL frequency synthesizer circuit (5 kHz step)
- Frequency error: 2.5 ppm, in the rated temperature range
- RF Power: switchable typ. 10mW / L10mW / 20mW/ L20mW / 50mW / 100mW
- Antenna connector: LEMO-F 1 pin
- Modulation: wideband/narrowband FM, with digital audio conditioning (FPGA)
- Nominal deviation: 40 kHz Wideband / 25 kHz Narrowband
- Peak deviation: 56 kHz Wideband / 35 kHz Narrowband
- Spurious emissions: < 2 nW
- Telemetry feature: TX also transmits a digitally modulated sub-carrier, suitable for: tone-squelch operation, remote battery monitoring, optional PTT (push to talk) operation
- Noise reduction system: ENS Wisycom Extended-Sound Optimized
- AF bandwidth in NarrowBand mode (NB): 45 Hz ÷ 17 KHz (3dB)
- AF bandwidth in WideBand mode (WB): 45 Hz ÷ 20 KHz (3dB)
- Distortion: < 0.3 % (0.15 % typ.)
- SND/D ratio (Analogue): typ. 115 dB (A)rms with 40 kHz deviation, typ. 121 dB (A)rms with 56 kHz deviation Wideband
- SND/D ratio (Analogue): typ. 115 dB (A)rms with 25 kHz deviation, typ. 121 dB (A)rms with 35 kHz deviation Narrowband
- Audio input connector: LEMO 3pin
- Audio input level: from -36 dBu (12mV RMS) to 26 dBu (15.5 V RMS) adjustable in 1 dB steps
- Maximum input level: +26 dBu (15.5 V) at clipping, +20 dBu (7.75 V) at nominal level
- Storage media: micro SD memory card (.wav files BWF)
- Time code: Linear time code decoding
- Bit rate: 16 bit / 24 bit / 32 bit
- Sampling rate: 48 kHz
- Managing interface: Bluetooth 5 long range, USB-C, IrDA
- LED: 2 RGB LEDs (red, green, and blue) for audio, RF, and battery status, 1 LED for recording, 1 LED for battery charger
- Battery lifetime indication: percentage or minute/second
- PTT function: pin 3 of the AF connector can be set to an external push button
- Display: high contrast OLED white display (128 x 64 pixels)
- Power supply: 2 x AA batteries (Alkaline, NiMh, or Lithium), MPRLBP lithium (5.55 Wh)
- Battery life: approx. 10 hours @ 10mW with Alkaline batteries
- Temperature range: -10 to +55 C
- Dimensions (W x H x D in mm): 75.7 x 61.4 x 19.4 without clip
- Weight: 140 g without batteries (183 g with lithium battery)
